Warpaints Air Rebel Red: Airbrushing Tips for Miniatures
By The Army Painter: all you need for miniature painting | Published: 2026-10-29
Category: How-to Guides
Learn how to airbrush Warpaints Air Rebel Red for smooth, vibrant basecoats on miniatures. Step-by-step tips from thinning to cleanup.
Quick answer
Warpaints Air Rebel Red is an airbrush-ready paint that needs no thinning, but proper technique and pressure settings ensure a smooth, opaque red basecoat on your miniatures.
Why Rebel Red works straight from the bottle
Unlike many hobby paints that require precise thinning ratios, Warpaints Air Rebel Red is formulated for airbrush use right out of the bottle. This saves time and eliminates guesswork, especially when you're batch-painting or working on a tight schedule.
The pre-loaded mixing ball inside the bottle helps keep the pigment evenly suspended. A quick shake before each use is still recommended to ensure consistent color and flow.
Common mistakes to avoid
Even with airbrush-ready paint, spraying too close or at too high a pressure can cause spider-webbing or pooling. Rebel Red is a relatively opaque color, but applying it in one heavy coat can obscure fine details on your miniature.
Another pitfall is neglecting to clean the airbrush immediately after use. Red pigments can stain parts if left to dry, so a thorough flush with cleaner or water is essential.
Step-by-step airbrushing guide
- Shake the bottle thoroughly: Shake Warpaints Air Rebel Red for at least 30 seconds. The integrated mixing ball will break up any settled pigment and ensure a uniform consistency. Skipping the shake can lead to uneven color and tip dry.
- Set your airbrush pressure: Start at 18-22 PSI. Rebel Red flows well at moderate pressure. If you see sputtering, increase slightly; if you get pooling, reduce pressure. Too high pressure causes spider-webbing; too low causes speckling.
- Apply thin, even coats: Hold the airbrush 3-4 inches from the model. Spray in light passes, letting each coat dry for 30-60 seconds before applying the next. Two to three coats usually give full opacity. One heavy coat obscures detail and may run.
- Clean the airbrush immediately: After use, flush the cup and nozzle with airbrush cleaner or water until the spray runs clear. Red pigment can stain if left to dry inside the nozzle. A quick clean prevents clogs and extends airbrush life.
Product details
- Warpaints Air: Rebel Red: Airbrush-ready paints right from the bottle – no thinning required. You can pour Rebel Red directly into your airbrush cup and start spraying without mixing, which speeds up your workflow and reduces waste.
Warpaints Air: Rebel Red - Warpaints Air: Rebel Red: Developed in a Colour Triad System. Rebel Red is part of a coordinated triad, making it easy to highlight and shade consistently across your miniature without color-matching guesswork.
